Template parameters
If you should find yourself editing templates, these are some of the possible parameters you may use and an accompanying brief description.
| Name | Section | Description |
|---|---|---|
| bAllowScoreEdit | SETUP | Use scorestyle-edit even for single voices ["1"] |
| bAudibleLegato | SOUND | legato-bows audible ["0"] |
| bAudibleMIDI | SOUND | MIDI-specific items audible ["1"] |
| bAudibleTempo | SOUND | Tempochanges audible ["1"] |
| bAutoBass | SOUND | Automatic bass accompanimentpart constructed from chordsymbols ["1"] |
| bAutoChords | SOUND | Automatic chord accompanimentpart constructed from chordsymbols ["1"] |
| bAutoCorrect | SETUP | Autocorection of fixed bar lines ["1"] |
| bAutoEqualize | SETUP | Equalize all parts within a score by adding 'disposable rests' (gray) ["1"] |
| bAutoOrphan | LAYOUT | Justify unsufficient filled lines partially ["1"] |
| bBeepOnError | SETUP | Emit sound on errorsituations ["1"] |
| bConfirmQuit | SETUP | Confirm before quitting MusiCAD ["0"] |
| bCopyText | SETUP | Copy text when creating a new part ["0"] |
| bDCAudible | SOUND | DaCapo construction audible ["1"] |
| bDrumSync1 | SETUP | Percussion syncopated on beat 1 ["0"] |
| bDrumSync2 | SETUP | Percussion syncopated on beat 2 ["0"] |
| bDrumSync3 | SETUP | Percussion syncopated on beat 3 ["0"] |
| bDrumSync4 | SETUP | Percussion syncopated on beat 4 ["0"] |
| bDynAudible | SOUND | Dynamics audible ["1"] |
| bFastRepaint | SETUP | Redraw only the changed area ["0"] |
| bGhostScript | SETUP | Use GhostScript when printing. (without pictures) ["0"] |
| bGraceAnticipate | SOUND | use anticipating grace notes ["0"] |
| bGraceAudible | SOUND | Make note/MIDI enhancements audible ["1"] |
| bGraceChromatic | SOUND | Use chromatic beautifying notes ["1"] |
| bGraceSlow | SOUND | use slow grace notes ["0"] |
| bHideGraceNotes | LAYOUT | Hide all grace notes without actually removing them ["0"] |
| bHideNotes | LAYOUT | Audible note duration when entering notes ["0"] |
| bLastRecall | SETUP | Recall last used melody on start ["1"] |
| bMatchArcs | SETUP | Verify 'begin-tie' and 'end-tie' ["0"] |
| bMIDIEcho | SETUP | "Echo" every receivedMIDI-note to MIDI-playback. ["1"] |
| bMIDIText | SETUP | Store text with MIDI-files. ["1"] |
| bMultirestAudible | SOUND | Multiple rests take time ["1"] |
| bPercussionMapping | SOUND | enable MusiCAD percussion pitch change ["1"] |
| bPrependAcc | SETUP | enter accidentals beforehand (before click/<Enter> ["0"] |
| bQuantGrace | SETUP | Use gracenotes when quantisizing ["0"] |
| bQuantLead | SETUP | Use starting rest when quantisizing ["1"] |
| bQuantShort | SETUP | Use shortening when quantisizing ["0"] |
| bQuantTriads | SETUP | Use triads when quantisizing ["0"] |
| bReadLayout | SETUP | Read layout from MusiCAD files ["1"] |
| bShowAutoRests | LAYOUT | Synthesizer (0=GM 1=Base 2=Extended): ["0"] |
| bShowBorder | LAYOUT | Draw rectangle around each page within margin. ["0"] |
| bShowHints | SETUP | Show hint-information (like this) ["1"] |
| bShowMarks | SETUP | Show edit marks as little blue squares ["1"] |
| bStichAudible | SOUND | cue-notes and alike audible ["0"] |
| bSwing | SOUND | Swing-timing ( 1/16+1/16 becomes 1/12+1/24 ) ["0"] |
| bTaskPanelVisible | SETUP | Show taskpanel ["0"] |
| bTickLines | SETUP | use ticklines when creating a chordscheme ["0"] |
| bTrackEdit | SETUP | Track last edit bar on redisplay. ["0"] |
| bTracking | SETUP | Track melody during play. ["1"] |
| bTruncLines | LAYOUT | Do not write bar lines for unused part of line ["1"] |
| bUseColor | SETUP | Use color when printing ["1"] |
| bWarnBlock | SETUP | Emit warning before commiting changes on blocks. ["0"] |
| bWideScroll | SETUP | Scroll editwindow by measure or by line ["0"] |
| bWriteLayout | SETUP | Write layout when saving MusiCAD files ["1"] |
| colBorder | SETUP | Bordercolor on-screen in page-mode ["clGray"] |
| colCursorBK | SETUP | 2nd color for notecursor ["clRed"] |
| colCursorFG | SETUP | 1st color for notecursor ["clYellow"] |
| colDimmed | SETUP | Color for dimmed elements (grey-notes/invisible text) ["clGray"] |
| colFrame | SETUP | Framecolor around notes (if enabled) ["clGray"] |
| colMark | SETUP | Markercolor ('blue rectangles') ["clBlue"] |
| colNote | SETUP | Default notecolor on-screen ["clBlack"] |
| colPaper | SETUP | Papercolor on-screen ["clWhite"] |
| colSelect | SETUP | Selectioncolor ('Blocks') ["clRed"] |
| colStaff | SETUP | Staffcolor / ledgerline color on-screen ["clGray"] |
| fBarnumbers | LAYOUT | Textlayout for bar-numbers ["(Name=Arial, Size=5, Y=7)"] |
| fBarText | LAYOUT | Textlayout for staff-height text ["(Size=24, Y=-4)"] |
| fBase | LAYOUT | Base layout ["(Name=Times New Roman, Size=8, Style=fsNormal, Color=clDefault, X=0, Y=0, Align=taLeft)"] |
| fChords | LAYOUT | Textlayout for chordsymbols like Am, C#7, Ddim etc. ["(Y=-10)"] |
| fCoda | LAYOUT | Textlayout for DaCapo-constructions ["(Size=14, Y=8)"] |
| fDynamics | LAYOUT | Textlayout for dynamisc symbols ["(Size=12, X=-2, Y=-10, Align=taRight)"] |
| fFC | LAYOUT | centered text within footer ["()"] |
| fFingering | LAYOUT | Symbol layout for fingering-signs ["(Name=Times New Roman, Size=5)"] |
| fFL | LAYOUT | left text within footer ["()"] |
| fFR | LAYOUT | Right text within footer ["()"] |
| fHC1 | LAYOUT | Upper text centered within header ["(Size=20, Y=-2)"] |
| fHC2 | LAYOUT | Middle text centered within header ["(Size=15, Y=-1)"] |
| fHC3 | LAYOUT | Lower text centered within header ["(Size=10)"] |
| fHdrCenter | LAYOUT | Base header layout center ["()"] |
| fHdrFoot | LAYOUT | Base voetlayout ["()"] |
| fHdrNext | LAYOUT | Base non-first-page headerlayout ["()"] |
| fHdrOther | LAYOUT | Base header layout other ["(Name=Arial)"] |
| fHeaders | LAYOUT | Base header layout ["(Size=8, Style=fsNarrow, Y=0)"] |
| fHL1 | LAYOUT | Upper text left within header ["()"] |
| fHL2 | LAYOUT | Middle text left within header ["()"] |
| fHL3 | LAYOUT | Lower text left within header ["()"] |
| fHR1 | LAYOUT | Upper text right within header ["()"] |
| fHR2 | LAYOUT | Middle text right within header ["()"] |
| fHR3 | LAYOUT | Lower text right within header ["()"] |
| fInfo | LAYOUT | fsItalic, Y=8)"] |
| fInfo1 | LAYOUT | Textlayout used for directions 1 (dolce etc.) ["()"] |
| fInfo2 | LAYOUT | Textlayout used for directions 2 (instrument releated like arco etc.) ["(Y=-8)"] |
| fInfo3 | LAYOUT | Textlayout used for directions 3 (cue marks [A] etc.) ["(Name=Arial, Size=11, Style=fsNormal, Color=clRed, Y=7)"] |
| fISpecific | LAYOUT | Symbollayout for instrument-specific signs like upbow, stress etc. ["()"] |
| fLyrics | LAYOUT | Base textlayout for any lyrics ["(Name=Arial, Style=fsNarrow)"] |
| fLyrics1 | LAYOUT | Textlayout for lyrics 1 (i.e. 1st verse) ["()"] |
| fLyrics2 | LAYOUT | Textlayout for lyrics 2 (i.e. 2nd verse) ["(Y=-12)"] |
| fLyrics3 | LAYOUT | Textlayout for lyrics 3 (i.e. 3rd verse) ["(Y=-16)"] |
| fLyrics4 | LAYOUT | Textlayout for lyrics 4 (i.e. refrain) ["(Y=-20)"] |
| fMultiRest | LAYOUT | Textlayout for ciphers of multirest ["(Name=Times New Roman, Size=12, Style=fsBold, Y=5, Align=taLeft)"] |
| fMusic | LAYOUT | Baselayout for music-symbols ["(Name=MusiCAD, Size=10, Align=taCenter)"] |
| fNC | LAYOUT | centered text within header on non-first pages ["()"] |
| fNL | LAYOUT | Left text within header on non-first pages ["()"] |
| fNR | LAYOUT | Right text within header on non-first pages ["()"] |
| fOrnaments | LAYOUT | Symbol layout for ornamentation signs(mordenten, trillers etc.) ["(Size=12)"] |
| fSectionCenter | LAYOUT | centered text in melodiesecties ["(Size=15, Y=15)"] |
| fSectionLeft | LAYOUT | left text in melodysections ["(Y=13)"] |
| fSectionRight | LAYOUT | Right text text in melodiesecties ["(Y=13)"] |
| fSelection | LAYOUT | Textlayout for repeatsigns (prima volta, 1-tjes) ["(Size=8, Y=7)"] |
| fSpecial | LAYOUT | Textlayout for special music symbols ["()"] |
| fSymbol | LAYOUT | Symbol layout for manually inserted MusiCAD symbolen ["()"] |
| fTempo | LAYOUT | Textlayout for tempoaanduidingen ["(Name=Arial, Size=7, Y=8)"] |
| fText | LAYOUT | Base textlayout ["(Size=7, Y=-8)"] |
| fVoiceHdr | LAYOUT | Textlayout for partdescription at first line ["(Size=6, X=15, Y=7)"] |
| fVoiceHdrX | LAYOUT | Textlayout for partdescription at non-first lines ["(Size=0)"] |
| ibar linePct | LAYOUT | Weight of bar lines shown as percentage (100=default) ["100"] |
| iBarNumbering | LAYOUT | Choose bar-number locations ["0"] |
| iBarsLeadIn | SOUND | Number of lead-in ticks ["0"] |
| iBassNoteHi | SETUP | Highest note within auto-bas: ["B3"] |
| iBassNoteLo | SETUP | Lowest note within auto-bas: ["C2"] |
| iBottomStaffHeight | LAYOUT | Reserved extra whitespace below staff, usually 0 ["0"] |
| iChannel | SOUND | MIDI channel number (1-16) ["0"] |
| iChordNoteHi | SETUP | Highest note within auto-chord: ["C6"] |
| iChordNoteLo | SETUP | Lowest note within auto-chord: ["C4"] |
| iContinuationBars | DATA | Continue part with paattern used in the muber of bars given. ["0"] |
| iCurBar | DATA | Choose bar-number locations ["1"] |
| iCurID | DATA | Additional distance between two staffsystems within a score (verticalunits): ["0"] |
| iDrumNote1 | SETUP | Drum note at 1st beat ["35"] |
| iDrumNote2 | SETUP | Drum note at after beat ["42"] |
| iDrumNote3 | SETUP | Alternating drum note ["38"] |
| iDrumProgram | SETUP | Drumprogram to be used for percussion ["0"] |
| iDrumSplit4 | SETUP | language to be used in menu's and dialogs ["1"] |
| iDynAccent | SOUND | accent (MIDI-volume) ["10"] |
| iDynAccentExtra | SOUND | marcato (MIDI-volume) ["20"] |
| iDynBar | SOUND | Extra volume added to each first note within a bar ["10"] |
| iDynCluster | SOUND | Extra volume added to each first note within a cluster ["15"] |
| iDynCresc | SOUND | crescendo, louder, increasing volume (MIDI-volume) ["30"] |
| iDynDeCresc | SOUND | decrescendo/diminuendo, softer, decreasing volume (MIDI-volume) ["-30"] |
| iDynF | SOUND | forte, loud (MIDI-volume) ["110"] |
| iDynFF | SOUND | fortissimo, zeer loud (MIDI-volume) ["120"] |
| iDynFFF | SOUND | fortissimo possibile, as loud as possible (MIDI-volume) ["127"] |
| iDynMF | SOUND | mezzo forte, medium loud (MIDI-volume) ["100"] |
| iDynMP | SOUND | mezzo piano, medium soft (MIDI-volume) ["90"] |
| iDynP | SOUND | piano, soft (MIDI-volume) ["80"] |
| iDynPP | SOUND | pianissimo, very soft (MIDI-volume) ["60"] |
| iDynPPP | SOUND | pianissimo possibile, as soft as possible (MIDI-volume) ["40"] |
| iDynRFZ | SOUND | rinsforzando, stressed notecluster (MIDI-volume) ["-20"] |
| iDynSFZ | SOUND | sforzato, stressed single note (MIDI-volume) ["20"] |
| iDynStart | SOUND | Starting volume if no dynamics were used ["100"] |
| iDynTenuto | SOUND | tenuto (MIDI-volume) ["10"] |
| iEditX | SETUP | Note width in pixels during edit mode: ["5"] |
| iEditY | SETUP | Note height in pixels during edit mode: ["4"] |
| iFermatePercent | SOUND | Tempo adjust percent for fermates ["200"] |
| iFixedGraceDur | SOUND | Fixed embellishement duration (set 0 for relative duration) ["1/32"] |
| iHdrDist | LAYOUT | Distance between header and first line ["4"] |
| iHeaderSize | LAYOUT | Height of text above melody in vertical units: ["12"] |
| iHelpLinePercent | LAYOUT | Length of ledger lines (100% is default) ["100"] |
| iIndentStaff1 | LAYOUT | Staffindentation for first line. ["0"] |
| iIndentStaffNext | LAYOUT | Staffindentation for other lines. ["0"] |
| iInstrument | SOUND | MIDI-instrumentname, <F3> or rightclick to change. [""] |
| iLineFillPct | LAYOUT | Justify lines if at least this percentage of the line has beenfilled: ["60"] |
| iLineSpacing | LAYOUT | Additional distance between two staffsystems within a score (verticalunits): ["4"] |
| iMaxBackups | SETUP | Maximum number of backup copies per melody: ["2"] |
| iMaxDistPct | LAYOUT | Largest allowable notedistance used behind longest note (at 100% all notes are at least two dots apart) ["100"] |
| iMaxGlobalUndo | SETUP | Levels of global undo ["10"] |
| iMaxMenuFiles | SETUP | Maximum nr of previously opened files to be shown in File-menu ["5"] |
| iMenuOptions | SETUP | Options_dialog ["0"] |
| iMenuPart | SETUP | Score_dialog ["0"] |
| iMetronomeVolume | SETUP | Volume of MIDI-drum-metronome: ["100"] |
| iMIDIInputType | SETUP | Sound output device ["0"] |
| iMIDIInputVolume | SETUP | MIDI-Input volume ["100"] |
| iMIDILevel | SETUP | Synthesizer (0=GM 1=Base 2=Extended): ["0"] |
| iMIDIOutputType | SETUP | Sound input device ["0"] |
| iMIDIShiftIn | SETUP | Number of semitones to be shifted while recording: ["0"] |
| iMIDIShiftOut | SETUP | Number of semitones to be shifted while playing: ["0"] |
| iMIDISplit | SETUP | MIDI-split point: ["C3"] |
| iMinDistPct | LAYOUT | Smallest allowable notedistance used behind shortest note (at 100% all notes are at least half a dot apart) ["100"] |
| iMinTieDistance | LAYOUT | Draw slur instead of tie when notes are closer than prescribed (in 1/100 units) ["350"] |
| iNBarsPerLine | LAYOUT | Maximum bars per line (0=auto) ["0"] |
| iNLinesPerPage | LAYOUT | Maximum lines per page (0=auto): ["0"] |
| iNrstaff lines | LAYOUT | Nr of lines per staff, usually 5 ["5"] |
| iPageBottom | LAYOUT | mm whitespace use as bottom margin ["15"] |
| iPageFillPct | LAYOUT | Justify page if at least this percentage of the page has beenfilled: ["75"] |
| iPageLeft | LAYOUT | mm whitespace use as left margin ["20"] |
| iPageLen | LAYOUT | Length of paper in mm ["297"] |
| iPageRight | LAYOUT | mm whitespace use as right margin ["10"] |
| iPageTop | LAYOUT | mm whitespace use as top margin ["15"] |
| iPageWidth | LAYOUT | Width of paper in mm ["210"] |
| iPan | SOUND | Panning, position within stereoview: 0=left, 64=center, 127=right ["64"] |
| iPlayDur | SETUP | Audible note duration when entering notes ["100"] |
| iPrnOrient | LAYOUT | Paper Orientation (Portrait/Landscape) ["0"] |
| iPrnPaperSize | LAYOUT | Papersize ["4"] |
| iQuantNote | SETUP | Choose shortest allowable note (1/8) ["1/16"] |
| iQuantRest | SETUP | Choose shortest allowable rest (1/16) ["1/16"] |
| iQuantSmall | SETUP | Choose shortest allowable unit (1/32: Note>=Rest>=Unit. ["1/32"] |
| iRepeatCount | SOUND | : and :| too: ["1"] |
| iResizeOrphanPct | LAYOUT | 'Orphans' are bars on a non-filled line. and should expanded with the same amount as filled lines ["10"] |
| iSaveInterval | SETUP | Time in minutes between two automatic backup copies: ["3"] |
| iScaleHorizontal | LAYOUT | Horizontal scalingfactor (100% is default) ["100"] |
| iScaleVertical | LAYOUT | Vertical scalingfactor (100% is default) ["100"] |
| iSizeFtr | LAYOUT | Footer height at bottom of page. (0 for auto): ["8"] |
| iSizeHdrNext | LAYOUT | Header height of other pages.(0 for auto): ["8"] |
| iSizeHdrSection | LAYOUT | Minumum height to be reserved for use with sections ["20"] |
| iStaffDist | LAYOUT | Whitespace between two staffs within a score ["2"] |
| iStaffHeight | LAYOUT | Height of a staff in vertical units: ["20"] |
| istaff linePct | LAYOUT | Weight of staff lines shown as percentage (100=default) ["100"] |
| iStemLengthPct | LAYOUT | Length of stems (100% is default) ["100"] |
| iStemLinePct | LAYOUT | Weight of stems shown as percentage (100=default) ["100"] |
| iStichNoteOffset | SOUND | Stichnote play offset: ["0"] |
| iSwing | SOUND | Swing-timing used for long-short clusters 0='1:2', 1='2:3' ["0"] |
| iTempo | SOUND | Tempo in quarternotes per minute. ["120"] |
| iTopStaffHeight | LAYOUT | Reserved extra whitespace above staff, usually 0 ["0"] |
| iTransposition | SOUND | Transposition of part (play nr of semitones higher then notated) ["0"] |
| iUndoLimit | SETUP | # of undo buffers: ["30"] |
| iVolume | SOUND | Base playbackvolume of part, >=0, <=127 ["100"] |
| iWidthPostbar line | LAYOUT | Extra white space after bar lines (1/100 units) ["50"] |
| iWidthPostCKMchange | LAYOUT | Extra white space after key (1/100 units) ["50"] |
| iWidthPrebar line | LAYOUT | Extra white space before bar lines (1/100 units) ["50"] |
| sArea | DATA | Area [""] |
| sArranger | DATA | Arranger of the piece ($A) [""] |
| sComment | DATA | Comment [""] |
| sComposer | DATA | Composer of the piece ($C) [""] |
| sCopyright | DATA | Copyright holder ($R) [""] |
| sCountry | DATA | Coubtry of origin [""] |
| sDirGS | SETUP | GhostScript directory ["$eGS"] |
| sFC | LAYOUT | Footer text center ["$R"] |
| sFilGSDest | SETUP | Filename to be used with Postscript ["$tMCPRINT.PS"] |
| sFilSjabloneABC | SETUP | Layout template for imported ABC files [""] |
| sFilSjabloneMC | SETUP | Layout template for MusiCAD-files without self-contained layout [""] |
| sFilSjabloneMIDI | SETUP | Layout template for imported MIDI files [""] |
| sFilSjabloneTXT | SETUP | Layout template for imported text files ["$eDEFTXT.MSJ"] |
| sFL | LAYOUT | Footer text left ["$M $Q $D"] |
| sFR | LAYOUT | Footer text right ["$<Pg $#"] |
| sGSCommand | SETUP | GS Print command ["GS550.EXE"] |
| sGSDevice | SETUP | GhostScript 'device' to be used ["mswinpr2"] |
| sGSPrintOptions | SETUP | Parameters for GS printing ["-q -dBATCH -dNOPAUSE"] |
| sHC1 | LAYOUT | Header text center top ["$T"] |
| sHC2 | LAYOUT | Header text center middle ["$S"] |
| sHC3 | LAYOUT | Header text center bottom ["$F"] |
| sHL1 | LAYOUT | Header text left top ["$P$ $G$ $z"] |
| sHL2 | LAYOUT | Header text left middle ["$H$ $W"] |
| sHL3 | LAYOUT | Header text left bottom ["$@ $m"] |
| sHR1 | LAYOUT | Header text right top ["$v$ $X"] |
| sHR2 | LAYOUT | Header text right middle ["$C$ $Z"] |
| sHR3 | LAYOUT | Header text right bottom ["$A$ $Y"] |
| sInfo | DATA | Info [""] |
| sMode | DATA | Mode [""] |
| sNC | LAYOUT | Next page header text center ["$T"] |
| sndAlert | SETUP | Sound for low priority warning ["SystemAsterisk"] |
| sndClick | SETUP | Sound for lowest priority warning ["SystemDefault"] |
| sndError | SETUP | Sound for high priority error ["SystemExclamation"] |
| sndFatal | SETUP | Sound for fatal error ["SystemHand"] |
| sndWarn | SETUP | Sound for warning ["SystemQuestion"] |
| sNL | LAYOUT | Next page header text left ["$P"] |
| sNR | LAYOUT | Next page header text right ["$X"] |
| sOriginal | DATA | Originele auteur [""] |
| sPlayOrder | DATA | Order [""] |
| sSendToEMail | SETUP | SEND TO. ["Muziek Archief MusiCAD <muzamus@dse.nl>"] |
| sSource | DATA | Source of the tune ($Z) [""] |
| sStyle | DATA | Styledescription [""] |
| sSubTitle | DATA | First subtitle ($S) [""] |
| sSubTitle2 | DATA | Second subtitle ($F) [""] |
| sTextWriter | DATA | Songwriter of the lyrics ($W) [""] |
| sTitle | DATA | Main title of musicpiece ($T) [""] |
| sTuning | DATA | Tuning (like Bflat instruments) (X) [""] |
| sTxtArea | DATA | Description for "Area" [""] |
| sTxtArranger | DATA | Description for "Arranger" ["arr: "] |
| sTxtComment | DATA | Description for "Comment" [""] |
| sTxtComposer | DATA | Description for "Composer" [""] |
| sTxtCopyright | DATA | Description for "Copyright" ["\Oc "] |
| sTxtCountry | DATA | Description for "Country" [""] |
| sTxtInfo | DATA | Description for "Info" [""] |
| sTxtMode | DATA | Description for "Mode" [""] |
| sTxtOriginal | DATA | Description for "Original author" ["org: "] |
| sTxtPlayOrder | DATA | Description for "Order" [""] |
| sTxtSource | DATA | Description for "Source" [""] |
| sTxtStyle | DATA | Description for "Style" [""] |
| sTxtSubTitle | DATA | Description for "Subtitle" [""] |
| sTxtSubTitle2 | DATA | Description for "Seconf subtitle" [""] |
| sTxtTextWriter | DATA | Description for "Songwriter" ["txt: "] |
| sTxtTitle | DATA | Description for "Title" [""] |
| sTxtTuning | DATA | Description for "Tuning" [""] |